Audio Control DQL-8 Specifications download pdf (Page 20)

Owner’s Enjoyment Manual

AudioControl®

Dash Control

Placement And Mounting

The dash control may be mounted under the

dash using its own bracket or through a custom

hole in the dash. It should be within

reach of the driver and in a

spot where the LED is

plainly visible.

Dash Bracket Installation

The dash control mounts with two screws,

which attach to the underside of the dashboard.

Slide under the dash and place the dash control

in its mounting position, mark the two mount

ing holes, drill pilot holes, and secure with two

screws.

Custom Installation

For that custom, finished look, the dash con-

trol can be flush mounted directly on the dash

board (or anywhere else). We have provided an

extra label to help make this happen. Referenc

ing Figure 7, disassemble the dash control from

the mounting bracket. Start by pushing the LED

from its holder followed by removing the circuit

board and rotary control from the bracket. Drill

a 9/32 hole in the dashboard for the control

along with a 1/8 hole for the lock tab and a 13/64

hole for the LED holder. Reassemble the dash

control components on the dashboard and ap

ply the new label over the openings

Figure 7: Dash Control Assembly

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

No comments

Audio Control DQL-8 Specifications Page 20