TLV320AIC34
SLAS538A – OCTOBER 2007 – REVISED NOVEMBER 2007
Page 0 / Register 19: LINE1LP_x and LINE1LP_x and LINE1LM_xM_x to Left-ADC Control Register
READ/ RESET
BIT DESCRIPTION
WRITE VALUE
D7 R/W 0 LINE1L Single-Ended vs Fully Differential Control
If LINE1L is selected to both left- and right-ADC channels, both connections must use the same
configuration (single-ended or fully differential mode).
0: LINE1L is configured in single-ended mode.
1: LINE1L is configured in fully differential mode.
D6 – D3 R/W 1111 LINE1L Input Level Control for Left-ADC PGA Mix
Setting the input level control to one of the following gains automatically connects LINE1L to the left-ADC
PGA mix.
0000: Input level control gain = 0 dB
0001: Input level control gain = – 1.5 dB
0010: Input level control gain = – 3 dB
0011: Input level control gain = – 4.5 dB
0100: Input level control gain = – 6 dB
0101: Input level control gain = – 7.5 dB
0110: Input level control gain = – 9 dB
0111: Input level control gain = – 10.5 dB
1000: Input level control gain = – 12 dB
1001 – 1110: Reserved. Do not write these sequences to these register bits.
1111: LINE1L is not connected to the left-ADC PGA.
D2 R/W 0 Left-ADC Channel Power Control
0: Left-ADC channel is powered down.
1: Left-ADC channel is powered up.
D1 – D0 R/W 00 Left-ADC PGA Soft-Stepping Control
00: Left-ADC PGA soft-stepping at once per sample period
01: Left-ADC PGA soft-stepping at once per two η e periods
10 – 11: Left-ADC PGA soft-stepping is disabled.
Page 0 / Register 20: LINE2LP_x and LINE2LM_x to Left-ADC Control Register
READ/ RESET
BIT DESCRIPTION
WRITE VALUE
D7 R/W 0 LINE2L Single-Ended vs Fully Differential Control
(1)
If LINE2L is selected to both left- and right-ADC channels, both connections must use the same
configuration (single-ended or fully differential mode).
0: LINE2L is configured in single-ended mode.
1: LINE2L is configured in fully differential mode.
D6 – D3 R/W 1111 LINE2L Input Level Control for Left-ADC PGA Mix
Setting the input level control to one of the following gains automatically connects LINE2L to the left-ADC
PGA mix.
0000: Input level control gain = 0 dB
0001: Input level control gain = – 1.5 dB
0010: Input level control gain = – 3 dB
0011: Input level control gain = – 4.5 dB
0100: Input level control gain = – 6 dB
0101: Input level control gain = – 7.5 dB
0110: Input level control gain = – 9 dB
0111: Input level control gain = – 10.5 dB
1000: Input level control gain = – 12 dB
1001 – 1110: Reserved. Do not write these sequences to these register bits.
1111: LINE2L is not connected to the left-ADC PGA.
D2 R/W 0 Left-ADC Channel Weak Common-Mode Bias Control
0: Left-ADC channel unselected inputs are not biased weakly to the ADC common-mode voltage.
1: Left-ADC channel unselected inputs are biased weakly to the ADC common-mode voltage.
D1 – D0 R 00 Reserved. Write only zeros to these register bits.
(1) LINE1R single-ended vs fully differential control is available for both left and right channels. However, this setting must be same for both
the channels.
60 Submit Documentation Feedback Copyright © 2007, Texas Instruments Incorporated
Product Folder Link(s): TLV320AIC34
Comments to this Manuals