Audio Control FOUR.1i Specifications Page 83

  • Download
  • Add to my manuals
  • Print
  • Page
    / 98
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 82
www.ti.com
TLV320AIC34
SLAS538A OCTOBER 2007 REVISED NOVEMBER 2007
Page 0 / Register 94: Module Power-Status Register
READ/ RESET
BIT DESCRIPTION
WRITE VALUE
D7 R 0 Left-DAC Power Status
0:Left DAC is not fully powered up.
1: Left DAC is fully powered up.
D6 R 0 Right-DAC Power Status
0: Right DAC is not fully powered up.
1: Right DAC is fully powered up.
D5 R 0 MONO_LOP_x and MONO_LOM_x Power Status
0: MONO_LOP_x and MONO_LOM_x output driver is powered down.
1: MONO_LOP_x and MONO_LOM_x output driver is powered up.
D4 R 0 LEFT_LOP_x and LEFT_LOM_x Power Status
0: LEFT_LOP_x and LEFT_LOM_x output driver is powered down.
1: LEFT_LOP/M_ output driver is powered up.
D3 R 0 RIGHT_LOP_x and RIGHT_LOM_x Power Status
0:RIGHT_LOP_x and RIGHT_LOM_x is not fully powered up.
1: RIGHT_LOP_x and RIGHT_LOM_x is fully powered up.
D2 R 0 HPLOUT_x Driver Power Status
0: HPLOUT_x driver is not fully powered up.
1: HPLOUT_x driver is fully powered up.
D1 R 0 HPROUT_x Driver Power Status
0: HPROUT_x Driver is not fully powered up.
1: HPROUT_x Driver is fully powered up.
D0 R 0 Reserved. Do not write to this register bit.
Page 0 / Register 95: Output Driver Short-Circuit Detection Status Register
READ/ RESET
BIT DESCRIPTION
WRITE VALUE
D7 R 0 HPLOUT_x Short-Circuit Detection Status
0: No short circuit detected at HPLOUT_x
1: Short circuit detected at HPLOUT_x
D6 R 0 HPROUT_x Short-Circuit Detection Status
0: No short circuit detected at HPROUT_x
1: Short circuit detected at HPROUT_x
D5 R 0 HPLCOM_x Short-Circuit Detection Status
0: No short circuit detected at HPLCOM_x
1: Short circuit detected at HPLCOM_x
D4 R 0 HPRCOM_x Short-Circuit Detection Status
0: No short circuit detected at HPRCOM_x
1: Short circuit detected at HPRCOM_x
D3 R 0 HPLCOM_x Power Status
0: HPLCOM_x is not fully powered up.
1: HPLCOM_x is fully powered up.
D2 R 0 HPRCOM_x Power Status
0: HPRCOM_x is not fully powered up.
1: HPRCOM_x is fully powered up.
D1 D0 R 00 Reserved. Do not write to these register bits.
Copyright © 2007, Texas Instruments Incorporated Submit Documentation Feedback 83
Product Folder Link(s): TLV320AIC34
Page view 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 97 98

Comments to this Manuals

No comments